Product Reviews

BOSS Audio CX122 Review: A Pair of 12-Inch Car Subwoofers

A practical option for car audio buyers seeking a matched pair of 12-inch subwoofers for sealed or ported enclosures.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The BOSS Audio CX122 is a pair of 12-inch car subwoofers built around high stated power handling, flexible enclosure use, and straightforward connections.

This Boss Audio CX122 review focuses on whether that mix suits an upgrade when you have room for two drivers and an amplifier and enclosure plan to match.

BOSS CX122 Review Summary

The quick verdict

BOSS Audio CX122
4.2/5

900+ ratings

Read Amazon Reviews

BOSS Audio CX122

A practical option for car audio buyers seeking a matched pair of 12-inch subwoofers for sealed or ported enclosures.

  • Sold as a pair of 12-inch car component subwoofers.
  • Each subwoofer is listed with 700 watts RMS and 1,400 watts peak power handling.
  • Rubber surround and stamped steel basket.
  • Designed for use in sealed or ported enclosures.

Pros

  • Two drivers are included for builds designed around a subwoofer pair.
  • The stated RMS handling provides a clear reference for amplifier matching.

Consider before buying

  • The 5.4-inch listed depth and 11.102-inch diameter still require a fit check against the planned enclosure and vehicle space.
  • The power-handling figures alone do not specify the amplifier, enclosure volume, or tuning a complete system needs.
Read the full review summary

The CX122’s main appeal is receiving two subwoofers with 700 watts RMS power handling each, plus the option to use sealed or ported enclosures. Rubber surrounds, stamped steel baskets, and push terminals round out a conventional, installation-oriented design.

Its mounting dimensions give buyers a starting point for checking fit, though they do not replace a full measurement of the enclosure and surrounding space.

This pair is most relevant to car audio builders planning a two-driver setup and wanting flexibility in enclosure style.

The power figures describe handling capacity, not guaranteed loudness or a complete system requirement; match the amplifier and enclosure to the rest of the system before buying.

Buyers replacing one driver or working with limited mounting depth should check whether the pair and its dimensions fit their actual project.

The buying factors

BOSS CX122 Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Power-handling headroom

The stated 700 watts RMS per subwoofer gives buyers a substantial handling figure to use when planning a matched system.

8/10

Enclosure flexibility

The subwoofers are described for use in either sealed or ported enclosures.

8/10

Pair value for a two-driver build

The CX122 is supplied as a pair, which fits a project designed around two subwoofers.

6/10

Installation planning

Mounting diameter and depth are provided, but buyers still need to confirm clearance and enclosure fit.

7/10

Connection practicality

Push terminals offer a simple connection format for a planned installation.

7/10

Construction details

Rubber surrounds and stamped steel baskets provide useful design information, without establishing performance over time.

Key Features and Specifications of BOSS CX122

  • Sold as a pair of 12-inch car component subwoofers.
  • Each subwoofer is listed with 700 watts RMS and 1,400 watts peak power handling.
  • Rubber surround and stamped steel basket.
  • Designed for use in sealed or ported enclosures.
  • Push terminals for speaker connections.
  • Mounting dimensions are listed as 11.102 inches in diameter and 5.4 inches in depth.

Pros and Cons of BOSS CX122

Pros

  • Two drivers are included for builds designed around a subwoofer pair.
  • The stated RMS handling provides a clear reference for amplifier matching.
  • Sealed and ported enclosure compatibility gives builders a choice of box approach.
  • The product description supplies mounting dimensions and connection type for early installation planning.

Consider before buying

  • The 5.4-inch listed depth and 11.102-inch diameter still require a fit check against the planned enclosure and vehicle space.
  • The power-handling figures alone do not specify the amplifier, enclosure volume, or tuning a complete system needs.
  • A pair may be more than needed for a replacement project involving only one subwoofer.

Who Should Buy BOSS CX122?

Good fit

Consider the BOSS CX122 if your plan calls for two 12-inch subwoofers and you want the option of a sealed or ported enclosure.

Its per-driver RMS figure, push terminals, and stated mounting dimensions give you practical starting points for matching components and checking installation space.

Before choosing it, confirm that your enclosure plan accommodates the listed mounting diameter and depth, then match amplifier output to the subwoofers’ handling.

Treat peak power as a separate maximum figure rather than the everyday basis for system matching.

Who should skip it

Skip this pair if your project calls for only one driver or your available mounting space cannot accommodate the listed dimensions. If either point is uncertain, measure the intended opening and clearance before ordering.

Look elsewhere if you need detailed enclosure-volume or tuning guidance to be included with the product information; those planning details are not specified here.

BOSS CX122: What to Check Before Building

A pair changes the system plan

Because the CX122 is sold as a pair, it makes the most sense when the rest of the build is intended to use two subwoofers.

Check the available space and wiring plan for both drivers, and decide whether you are replacing a pair or starting a new setup.

Use RMS handling for matching

The listed 700 watts RMS per subwoofer is the more useful power-handling figure for amplifier planning, while 1,400 watts is the peak figure.

Neither number specifies the amplifier you need by itself; consider the complete system and its intended configuration.

Choose the enclosure with the build in mind

The stated sealed and ported enclosure compatibility offers a choice of box style.

Since no enclosure volume or tuning details are provided, decide on the enclosure design separately and check that it suits the available vehicle space and the rest of your system.

Measure the intended mounting location

The listed diameter and depth help with an initial fit check, but the enclosure opening, mounting arrangement, and nearby clearance matter too. Measure the actual installation area before committing to a two-driver layout.

Alternatives to BOSS CX122

Car Component Subwoofers alternative

BOSS Audio CH10DVC Chaos Series 10-Inch Subwoofer
4.2/5

600+ ratings

Read Amazon Reviews

BOSS Audio CH10DVC Chaos Series 10-Inch Subwoofer

Choose the CH10DVC if a single smaller driver and its specified dual voice coil better suit your installation plan. The CX122 is the closer fit for a build that specifically needs two 12-inch subwoofers.

  • The CH10DVC is a single 10-inch subwoofer with a dual 4-ohm voice coil, 4.63-inch mounting depth, and 2-inch voice coil.
  • The CX122 is a pair of 12-inch subwoofers with 700 watts RMS handling per driver and compatibility with sealed or ported enclosures.

Car Component Subwoofers alternative

BOSS Audio Phantom P126DVC
4.2/5

500+ ratings

Read Amazon Reviews

BOSS Audio Phantom P126DVC

Consider the Phantom if you need one 12-inch driver and its specified dual voice coil or higher per-driver RMS handling better fits the system design.

Choose the CX122 when the planned build calls for a pair and the enclosure flexibility is useful.

  • The Phantom P126DVC is one 12-inch subwoofer with a dual 4-ohm, 2-inch copper voice coil and 1,150 watts RMS power handling.
  • The CX122 comes as two drivers, each listed at 700 watts RMS, and is described for sealed or ported enclosures.

Is BOSS CX122 Worth It?

The BOSS Audio CX122 is worth considering for a two-subwoofer car audio build where sealed or ported enclosure flexibility, stated RMS handling, and straightforward push terminals fit the plan.

Its pair format is its clearest buying advantage for that use.

Measure the mounting area and plan the enclosure and amplifier before choosing it. If you need one driver or the listed dimensions do not fit your installation, a single-subwoofer design may be a better match.

Your review at a glance

BOSS Audio CX122
4.2/5

900+ ratings

Read Amazon Reviews

BOSS Audio CX122

A practical option for car audio buyers seeking a matched pair of 12-inch subwoofers for sealed or ported enclosures.

  • Sold as a pair of 12-inch car component subwoofers.
  • Each subwoofer is listed with 700 watts RMS and 1,400 watts peak power handling.
  • Rubber surround and stamped steel basket.
  • Designed for use in sealed or ported enclosures.

Written by

nitrosheriff.com Editorial Team

Editorial team

nitrosheriff.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

BOSS Audio CX122

BOSS Audio CX122

A practical option for car audio buyers seeking a matched pair of 12-inch subwoofers for sealed or ported enclosures.

  • Sold as a pair of 12-inch car component subwoofers.
  • Each subwoofer is listed with 700 watts RMS and 1,400 watts peak power handling.
Check Video Reviews on Amazon